Module 1

An enclosed unit based on a 20’ ISO container with rear and side opening doors. The module will provide USAR support in the early stages of an incident. Both sides can be opened via cantilever doors. The interior of the module will be fitted with racks and shelves in which the equipment will be stowed. The module will have a heating and ventilation capability.

• Scene assessment & safety
• Technical search
• Temporary shoring – metal
• Power generation & lighting
• Drills and concrete breakers
• Safe working at height
• Timber and timber cutting
• Hand tools
• Bolts and anchor

Module 2

An enclosed unit based on a 20’ ISO container with rear and side opening doors. The module will provide heavy rescue equipment required at a major transport incident. Both sides can be opened via cantilever doors. The interior of the module will be fitted with racks and shelves in which the equipment will be stowed. The module will have a heating and ventilation capability.

• Hot cutting
• Heavy hydraulic equipment
• Confined space working
• Rope access & rescue
• Timber chain saws
• Lifting & moving equipment
• Power generation & lighting
• Mechanics tools
• Bolts and anchors

Module 3

An enclosed unit based on a 20’ ISO container with rear and side opening doors. The module will provide heavy rescue support in the developing stages of an incident. Both sides can be opened via cantilever doors. The interior of the module will be fitted with racks and shelves in which the equipment will be stowed. The module will have a heating and ventilation capability.

• Timber shoring equipment
• Nailing equipment
• Bolts & anchors
• Power generation & lighting
• Large capacity air lift systems
• Fast cut saws
• Access & working platforms
• Hydraulic breaking & breaching

Module 4

An open unit based on a 20’ ISO container with fixed sides to a height of 1.2m. The module will be used to carry equipment, including a MPV and can also act as a tipper unit for the movement of debris. The rear of the module is a hinged gate allowing full width access to the module and the gate also incorporates a hinged flap for use when the module is operating as a tipper unit.

• Multi-Purpose Vehicle*
• MPV equipment
• Power generation & lighting
• Portable shelters

Module 5

A flat-bed unit based on a 20’ ISO container. The module will be used to carry timber and equipment and incorporates a tilt-cover and a load securing mechanism.

Timber stock including cribbing, wedges and bulk timber.